Step 4 : Setting Up The Vcr With The Auto Set Up Function - Sony SLV-SE210D Operating Instructions Manual

Step 4 : Setting up the VCR with the Auto
Before using the VCR for the first time, set up the VCR using the Auto Set Up
function. With this function, you can set the language for the on-screen display, TV
channels, guide channels for the ShowView system*, and VCR clock* automatically.
1
2
3
PLAY
OK
4
PLAY
OK
14
Setting up the VCR with the Auto Set Up function
Set Up function
Turn on your TV and set it to the video channel.
If your TV does not have a Scart (EURO-AV) connector, tune the
TV to channel 32 (the initial RF channel for this VCR). Refer to
your TV manual for TV tuning instructions. If the picture does not
appear clearly, see "To change the RF channel."
Connect the mains lead to the
mains.
The VCR automatically turns on,
and the language abbreviations
appear on the TV screen.
Press M/m/</, to select the abbreviation of the language from
the table on page 15, then press OK.
The message for the Auto Set Up function appears.
Press OK.
The COUNTRY SELECTION
menu appears.
GB DE
IT NL
ES PT
DK FI
S ELECT :
S ET : OK EXIT
COUNTRY SE LECTION
B ELGIQUE ÖSTERREICH
DENMARK DE UTSCHLAND
E SPA Ñ A FINLAND
ITALIA NE THERLANDS
NORGE SCHWEIZ
S VERIGE PORTUGAL
OTHERS
S ELECT :
S ET : OK EXIT
FR
GR
S E
: MENU
: MENU