Sony SLV-EZ11AZ Operating Instructions Manual page 22

Presetting channels (continued)
Disabling unwanted programme positions
After presetting channels, you can disable unused programme positions. The
disabled positions will be skipped later when you press the PROG +/–
buttons. (For SLV-EZ44AZ/EZ22AZ only) You can also disable unwanted
programme positions using the SET UP CH AND G-CODE menu (page 28).
1
2
3
4
If the picture is not clear
Normally, the Auto Fine Tuning (AFT) function automatically tunes in
channels clearly. If, however, the picture is not clear, you may also use the
manual tuning function.
1
2
3
4
Notes
• The menu disappears automatically if you do not proceed for more than a few
minutes.
• The channel numbers besides CHANNEL SET may not be the same as those in your
area. This is because this VCR's channel search system is based on the fixed TV
system that has the widest channel coverage. If necessary, apply your local channel
numbers to the programme positions (see "Changing programme positions" on
page 26).
22
Getting Started
Press MENU, then press M/m to move the cursor (B) to TUNER
PRESET and press OK.
Press PROG +/– to select the programme position you want to skip.
Press M/m/</, to move the cursor (B) to ADD/ERASE, then select
ERASE.
Press OK.
Press PROG +/– to select the programme number for which you cannot
obtain a clear picture.
Press MENU, then select TUNER PRESET and press OK.
Select FINE TUNING.
The fine tuning meter appears.
TUNER PRESET PROG14
COUNTRY • AUS NZ
NORMAL / CATV • NORM CATV
AUTO PRESET
CHANNEL SET 35
ADD / ERASE • ADD ERASE
AFT • ON OFF
FINE TUNING
SET : [ ]
Press </, to get a clearer picture, then press OK.
Note that the AFT (Auto Fine Tuning) setting switches to OFF.
Selected programme position