Advertisement
Function 1 – 16 (Timer / Logic)
C.
These parameters set the additional functions such as timer and
logic. The logic gate truth tables can be found in the device
menu section.
Function type (Disabled)
If set to 'Disabled', no timer specific parameter and group object
is available.
Function type (Timer)
The timer specific parameters and group objects are available.
Function name (free text input)
The function name can be chosen freely. The maximum length of
the name is 10 characters.
The name will be shown in the group object entry within the ETS
software. After the ETS application download the name will be
shown within the devices function menu entry as well as in the
function submenu as a headline.
Timer type (Switch-on delay)
A timer that switches ON after duration defined in
'Delay time [s]' parameter.
The output value can be inverted by parameter
'Output' (Not inverted / Inverted).
-------1------------------0----------
Input
-------|-T-1--------------0----------
Output
Group Object
Timer – Switch-on delayed - Input
Timer – Switch-on delayed - Output
Timer type (Switch-off delay)
A timer that switches OFF after duration defined in
'Delay time [s]' parameter.
The output value can be inverted by parameter
'Output'. (Not inverted / Inverted)
-------1------------------0----------
Input
-------1------------------|-T-0------
Output
Group Object
Timer – Switch-off delayed - Input
Timer – Switch-off delayed - Output
©2019 WEINZIERL ENGINEERING GmbH
Type KNX
Size
Direction
1.002
1 Bit
From KNX
1.002
1 Bit
To KNX
Type KNX
Size
Direction
1.002
1 Bit
From KNX
1.002
1 Bit
To KNX
Timer type (Switch-on and -off delay)
A timer that switches ON and OFF after duration defined in
'Delay time [s]' parameter.
The output value can be inverted by parameter
'Output'. (Not inverted / Inverted)
Group Object
Timer – Switch-on/off delayed - Input
Timer – Switch-on/off delayed - Output
-------1------------------0----------
Input
-------|-T-1--------------|-T-0------
Output
Timer type (Impulse (Staircase))
Timer with impulse that – after being switched ON – automati-
cally switches OFF after a defined duration defined in
'Delay time [s]' parameter.
The output value can be inverted by parameter
'Output'. (Not inverted / Inverted)
-------1------------------0----------
Input
-------1-T-0-------------------------
Output
Group Object
Timer – Switch-impulse (staircase) - Input
Timer – Switch-impulse (staircase) - Output
Each timer can be stopped by sending the opposite val-
ue to its input group object. For example:
An already started switch on timer can be stopped by
sending OFF (0) to its input group object.
Function type (Logic)
The logic specific parameters and group objects are available.
Group Object
Logic – Gate input A - Input
Logic – Gate input B - Input
Logic – Gate output – Output
Function name (free text input)
The function name can be chosen freely. The maximum length of
the name is 10 characters.
The name will be shown in the group object entry within the ETS
software. After the ETS application download the name will be
shown within the devices function menu entry as well as in the
function submenu as a headline.
Gate type (AND gate)
The output is triggered on (1), if both inputs are switched on (1).
Gate type (OR gate)
The output is triggered on (1), if one or both inputs are switched
on (1).
Type KNX
Size
Direction
1.002
1 Bit
From KNX
1.002
1 Bit
To KNX
Type KNX
Size
Direction
1.002
1 Bit
From KNX
1.002
1 Bit
To KNX
Type KNX
Size
Direction
1.002
1 Bit
From KNX
1.002
1 Bit
From KNX
1.002
1 Bit
To KNX
Page 7/8
Advertisement
