Advertisement
T. Logic NOR gate
The output is triggered on (1) if both in-
puts are switched off (0).
Input A
U. Logic XNOR gate
The output is triggered on (1) if both in-
puts are equal.
Input A
V. Logic INVERTER
Input on (1) is converted into output off
(0). Input off (0) is converted into output
on (1).
Input
©2019 WEINZIERL ENGINEERING GmbH
Input B
Output
0
0
1
0
1
0
1
0
0
1
1
0
Input B
Output
0
0
1
0
1
0
1
0
0
1
1
1
Output
0
1
1
0
2. ETS Setup
The ETS database entry (ETS 4.2 and ETS 5) can be down-
loaded on the KNX PowerSupply 366 product website
(www.weinzierl.de).
A.
General
This parameter allows setting of general functions of the device:
Device name (free text input)
The device name can be chosen freely. The maximum length of
the name is 30 characters. After the ETS application download
the name will be shown within the devices startup and idle dis-
play.
Display synchronization (Enabled / Disabled)
If enabled, a communication object
'Display synchronization – Trigger' appears.
Each Weinzierl device with a display of this product range pro-
vides this parameter. As soon as the device wakes up, the asso-
ciated group telegram will be sent to the KNX bus which wakes
up every other device whose display synchronization group
object is associated to the same group address.
Group Object
1: Display synchronization – Trigger
Operating control (Enabled / Disabled)
If enabled, a parameter 'Cycle time' (10 s – 24 h) and a group
object 'Operating control – Monitor' appears. This group object
allows to implement a 'heart beat'. If associated with a group
address, the group telegram will be sent to the KNX bus accord-
ing to the set 'Cycle time'.
The telegram can then be used to detect whether the device is
still connected and working.
Group Object
2: Operating control – Monitor
Bus reset via object (Enabled / Disabled)
If enabled, the parameter provides the group object 'Bus reset –
Trigger'. If associated with a group address a bus reset can be
forced by sending a group telegram.
Group Object
3: Bus reset – Trigger
Type KNX
Size
Direction
1.017
1 Bit
From / To KNX
Type KNX
Size
Direction
1.017
1 Bit
To KNX
Type KNX
Size
Direction
1.017
1 Bit
To KNX
Page 5/8
Advertisement
