Miele CVA 7840 Operating And Installation Instructions page 98

Problem solving guide
 Push the catches on the left and right
of the milk valve holder and pull the
holder forwards to remove.
 Dismantle the holder and the silicone
seal.
 Lift out the stainless steel stem.
98
 Clean the individual parts of the milk
valve in the dishwasher.
Useful tip: If dried on milk residues are
located on the front side, soak the
stainless steel stem in warm water with
a little washing-up liquid before placing
it in the dishwasher.
Fitting the milk valve
 Slide in the stainless steel stem from
above.
 Fit the silicone seal in the milk valve
holder.
 Fit the holder with the silicone seal
until it clicks into position.