Connecting To The Line 1 In Jacks - Sony RDR-VX511 Operating Instructions Manual

Connecting to the LINE 1 IN jacks

You can connect a second VCR or similar device.
Other VCR, etc.
LINE OUTPUT
R
AUDIO
L
VIDEO
: Signal flow
z Hint
When the connected equipment outputs only monaural sound, connect an audio cord to the LINE 2 IN AUDIO L
(MONO) jack.
Notes
• Do not connect the output jack of this recorder to another equipment's input jack with the other equipment's output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen.
VCR-DVD recorder
Be sure to connect your VCR to the VCR-DVD recorder and your TV in the order shown below. To watch video tapes,
watch the tapes through a second line input on your TV.
VCR VCR-DVD recorder
• If the recorder's power cord is disconnected, you will not be able to view the signals from the connected VCR.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
Audio/video cord
(not supplied)
VCR-DVD recorder
VCR TV
Line input 1
TV
Line input 2
LINE 1 IN
VIDEO
AUDIO
to LINE 1 IN
COMPONENT
AUDIO OUT S VIDEO OUT LINE 1 IN LINE OUT VHF/UHF
VIDEO OUT
VIDEO VIDEO
IN
L Y
L
R P
B
DIGITAL AUDIO OUT
P R
R
OUT
OPTICAL COAXIAL AUDIO AUDIO
27