Step 3 : Connecting the DVD-VCR
Note that "Advanced Hookups" (page 53) explains additional hookup methods that
will optimize the picture and sound for a true "hometheatre" experience.
If your TV has a Scart (EURO-AV) connector, see page 13.
If your TV does not have a Scart (EURO-AV) connector
1
2
3
Note
• When you connect the DVD-VCR and your TV only with an aerial cable, you have to tune
your TV to the DVD-VCR (see page 15).
12
Connecting the DVD-VCR
AERIAL IN
: Signal flow
Disconnect the aerial cable from your TV
and connect it to
on the rear panel of the
DVD-VCR.
Connect
of the DVD-VCR and the
aerial input of your TV using the supplied
aerial cable.
Connect the mains lead to the mains.
Mains lead
to mains
Aerial cable (supplied)