About Your Vertical Surge Suppressor Strip (Sp197A, Sp198A, Or Sp199A) - Black Box PS186A Manual

2.3 Vertical Surge Suppressor Strip (SP197A, SP198A, or SP199A)
The SP197A is a 48" rack mountable power strip that mounts from top to
bottom in the rear of standard 19" racks. It has 10 outlets on its front panel.
The SP198A is a 70" rack mountable power strip that mounts from top to
bottom in the rear of standard 19" racks. It has 11 outlets on its front panel.
The SP199A is a 77" rack mountable power strip that mounts from top to
bottom in the rear of standard 19" racks. It has 12 outlets on its front panel.
Vertical Surge Suppressor Strips SP197A, SP198A, and SP199A all have the
following features:
• Electrical and mechanical grounding.
• UL 1449 400-volt clamping category (actually clamps at 336 volts).
• Resists EMI/RFI up to 40 dB.
• LED goes dark to show that the unit has done its job—it has taken a major
surge, sparing the attached devices—and should be replaced.
• No power switch; devices plugged into the strip can't be accidentally
turned off.
CHAPTER 2: Introduction
15