Black Box PS186A Manual page 16

RACK MOUNT POWER STRIPS AND SURGE SUPPRESSORS
2.2.2 400 V R
OLT
The SP211A is a rackmountable power strip for standard 19" racks.
It has 6 outlets on its rear panel, as well as these features:
• Electrical and mechanical grounding.
• Protective circuit breaker with front-panel reset button.
• UL 1449 400-volt clamping category (actually clamps at 336 volts).
• Resists EMI/RFI up to 40 dB.
• Automatically cuts off power if its surge-protection components fail.
• LED goes dark to show that the unit has done its job—it has taken
a major surge, sparing the attached devices—and should be replaced.
• No power switch; devices plugged into the strip can't be accidentally
turned off.
2.2.3 P R
REMIUM ACK
The SP211A is a rackmountable power strip for standard 19" racks.
It has 6 outlets on its rear panel, as well as these features:
• Electrical and mechanical grounding.
• Protective circuit breaker with front-panel reset button.
• UL 1449 330-volt clamping category (actually clamps at 260 volts).
• Resists EMI/RFI up to 60 dB.
• LED goes dark to show that the unit has done its job—it has taken
a major surge, sparing the attached devices—and should be replaced.
• No power switch; devices plugged into the strip can't be accidentally
turned off.
14
M S
ACK OUNT URGE
M S
OUNT URGE
S , S
UPPRESSOR WITCHLESS
S (SP215A)
UPPRESSOR
(SP211A)