GREAT PLAINS NTS2509 Operator's Manual
  1. Manuals
  2. Brands
  3. GREAT PLAINS Manuals
  4. Seeders
  5. NTS2509
  6. Operator's manual

GREAT PLAINS NTS2509 Operator's Manual

S/n+ d1250l+ 2019+ nts seeder, base unit with options/base unit
Hide thumbs
Table of Contents

Advertisement

Quick Links

Table of Contents
Operator's Manual
NTS2507, NTS2509, & NTS2511 s/n+ D1250L+
Read the operation manual entirely. When you see this symbol, the
!
subsequent instructions and warnings are serious - follow without
exception. Your life and the lives of others depend on it!
Base Unit
39464
Illustrations may show optional equipment not supplied with standard unit.
ORIGINAL INSTRUCTIONS
© Copyright 2019
2019+ NTS Seeder
Manufacturing, Inc.
www.greatplainsmfg.com
Base Unit with Options
Printed 7/01/19
39465
XXXXX
EN
313-900M

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NTS2509 and is the answer not in the manual?

Questions and answers

Related Manuals for GREAT PLAINS NTS2509

Summary of Contents for GREAT PLAINS NTS2509

  • Page 1 Table of Contents Operator’s Manual NTS2507, NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder Manufacturing, Inc. www.greatplainsmfg.com Read the operation manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it!

  • Page 2: Machine Identification

    Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 3 Great Plains Manufacturing, Inc. provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Great Plains Manufacturing, Inc. assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.
  • Page 4 Section 12: Torque Values & Tire Inflation . . 70 Section 13: Warranty ....71 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 5: Safety At All Times

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is you best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
  • Page 6  Lower implement to the ground and  Replace parts on this implement above recommended pressures follow all shutdown procedures with genuine Great Plains parts shown in the Operator’s Manual. before leaving the operator’s seat to only. Do not alter this implement in ...
  • Page 7 Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Great Plains recommends the use of a CAB or roll-over-protective-  Slow moving tractors, and  Never carry riders on tractor or structures (ROPS) and seat belt self-propelled equipment can implement.

  • Page 8: Important Safety Information

    Important Safety Information These are common practices that may or may not be applicable to the products described in this manual.  Be aware of and follow OSHA  If possible, change into disposable Avoid crystalline Silica or washable work clothes at the (or other local, State, or Federal) (quartz) Dust guidelines for exposure to airborne...
  • Page 9 Important Safety Information This page left blank intentionally. 7/1/19...

  • Page 10: Safety Labels

    Some new equipment installed during repair requires with a similar type of straight edge. safety labels to be affixed to the replaced component as 39009 818-858C WARNING: General Information NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 11 WARNING: High Pressure Fluid Hazard 3 - Places; On all hydraulic lift cylinders 818-398C CAUTION: Falling hazard standing/stepping on tires Tow Option 39012 2- Places: On both rear axle arms 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 12 2 - Places: At each end of walk board Tow Option 39012 39012 818-254C DANGER: Rotating Roller Hazard 2 - Places: On rear roller scraper 2 - Places: On front spike rollers 39011 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 13 DANGER: Guard Missing (Beneath Guard) 2 - Places: Behind chain guards 39091 858-765C WARNING: Pinch Point Hazard 39055 2 - Places: Both sides of Spike Roller adjustment lever. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 14: Using This Manual

    Great Plains and should only be replaced department. with genuine Great Plains parts. Contact a Great Plains NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 15: Tractor Requirements

    NTS2507 ......60 hp NTS2509 ......80 hp NTS25011 .

  • Page 16: Sling Bracket

    Grass Seed Grass Seedbox Sling Bracket Small Seeds Seedbox Native Seedbox Grass Seed Sling Bracket 39072 Proper Lifting Method Using Grass Seed Sling Brackets Figure 1-3 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 17 (#5) until it stops. Small Seeds Seed Cups Viewed From Beneath Seedbox b. Tighten 1/4"-20 hex nuts (#8) to the correct torque Figure 1-6 for GR5 bolts (#10). 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 18 4. Loosen nut (#18) securing idler sprocket (#2) and remove roller chain (#27). NOTE: Keep greasable pivot bolt (#7) and all-seeds drive sprocket with lockout clutch (#5) together. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 19 13. Attach console (#1) to the seedbox side panel with knobs. 8-32 x 1" round head screws (#13), flat washers (#23), lock washer (#22), and hex nuts (#17). Tighten hex nuts to the correct torque. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 20 NTS2511: 3/8" Hydraulic hose, 129" long x 3/4" FJIC NTS2507: 3/8" Hyd. hose, 175" lg. x 3/4" MORB X 3/4" FJIC NTS2509: 3/8" Hyd. hose, 188" lg. x 3/4" MORB X 3/4" FJIC NTS2511: 3/8" Hyd. hose, 198" lg. x 3/4" MORB X 3/4" FJIC Without Native Seedbox NTS2507: 3/8"...

  • Page 21: Purge Hydraulic System

    Disengage hydraulics, and wait one minute. This will allow any trapped air to migrate toward the re-phasing port. 8. Repeat steps 6 & 7 for each of the two remaining hydraulic cylinders. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 22 Table of Contents Section 1: Assembly & Set-up This page left blank intentionally. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 23: Operating Checklist

    Make sure the Native Seed gearbox is properly lubricated. See Gearbox for the Native Seedbox. Check seeder initially and periodically for loose bolts and pins. Refer to Torque Values Chart. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 24: Section 2: Operating Instructions

    15. Refer to Figure 2-2: Remove slow moving vehicle keeper (#5). sign from the back of the tractor and insert it in mounting socket (#5) on the back of the seedbox. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 25 4. Add cable ties to wire harness (#1, #2, & #4) as needed to secure them in place. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 26 (#1) as possible, hook. and lower plate of clevis (#2). Secure hitch pin with 4. Start tractor and raise 3-point lift arms fully up. customer supplied hitch pin keeper (#5). NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 27 13. Store wire retainer pin (#7) in highest pin hole available in the hitch channel. 2. Remove detent pin (#13) and park jack (#14). 14. Continue unhook instructions on next page. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 28 39059 steering and stopping, and never exceed 20 mph (32.2 km/ Rear Transport Locks h) with attached equipment. Rough terrain requires a Figure 2-7 slower speed. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 29 8. Shift tractor to a lower gear when traveling over rough or hilly terrain. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 30 Extend jack (#14) to remove load from drawbar. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 31 Lock lid down with lid latch handle (#5) to keep Lock lid down with lid latch handles (#1) to keep moisture out. moisture out. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 32: How The Seeder Works

    For calculating native seed rates, see “Native Seed Rate Chart” on page 52. Lock lid down with lid latch handle (#5) to keep moisture out. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 33 See “Drive Sprocket Engagement” on page 30 for additional information regarding the four drive sprockets. 39082 Main Drive Sprocket With Lockout Clutch Figure 2-12 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 34 (#3 or #4) that is chained. unit can be safely lowered to ground level. 2. Shut tractor down properly before dismounting. Refer to “Tractor Shutdown Procedure” on page 19. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 35: Operating The Seeder

    Mark any potential hazards. 2. Clear area to be seeded of rocks, branches, and other foreign objects on top the ground. Mark any potential hazards. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 36 Slow your ground speed to eliminate ridging. Re-engage the All Seeds Drive System once you are satisfied that the proper amount of soil opening action is being achieved. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 37 3. Tighten the four 3/8"-16 GR5 hex head bolts and lock Start tractor, remove support blocks, and lower nuts (#5 & #6) to the proper torque. seeder to ground level. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 38 10. Install drive chain (#3) with 66 links. 11. Adjust drive chain (#3) with idler sprocket (#2). When adjusted properly, tighten 3/8" locknut (#1) to the correct torque. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 39 (#17). Tighten bolt to 31 ft-lbs. 8. Secure bottom of guard (#19) with existing 3/8"-16 x 3/4" GR5 bolt (#15), lock washer (#16), and flat washer (#17). Tighten bolt to 31 ft-lbs. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 40 To This Position. In Highest Position) b. Lower seeder frame onto support blocks that will Seed Cup Settings support the rear roller just above ground level. Figure 4-4 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 41 Minor adjustments to the seed rate adjustment lever may be necessary if seeder is seeding more or less seed than desired. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 42 0.35 0.39 0.40 0.44 0.46 0.50 0.53 0.57 0.59 0.61 0.63 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 43 0.69 0.78 0.86 0.94 0.99 1.07 1.22 1.26 1.38 1.43 1.52 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 44 1.00 1.12 1.25 1.40 1.52 1.65 1.83 1.98 2.11 2.27 2.35 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 45 Kentucky Blue Grass (Kilograms per 1000 Square Meters) High Range Low Range Low Range w/Reduction IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 46 Wheatgrass - Western (Kilograms per 1000 Square Meters) High Range Low Range Low Range w/Reduction IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 47 48.5 52.6 56.1 60.4 62.4 Low Range w/Reduction 10.3 11.1 11.5 IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 48 Minor native seeds with lock in/out pin (#2). adjustments to the seed rate adjustment lever may be necessary if seeder is seeding more or less seed than desired. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 49 50.9 51.8 Coated Centipede (Pounds per 1000 Square Feet) Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 50 12.6 Kentucky Blue Grass (Pounds per 1000 Square Feet) Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 51 Zenith Zoysia Grass Seed (Pounds per 1000 Square Feet) Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 52 57.1 58.1 Coated Centipede (Kilograms per 1000 Square Meters) Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 53 14.1 Kentucky Blue Grass (Kilograms per 1000 Square Meters) Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 54 Zenith Zoysia Grass Seed (Kilograms per 1000 Square Meters) Low Range IMPORTANT: Do Not operate seed rate adjustment lever at -0- cup setting. Seed cup damage may occur. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 55 Table of Contents Section 5: Small Seed Rate Adjustment This page left blank intentionally. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 56 Reinstall drive chain (#9) and adjust chain take-up (#11). See “Native Grass Seed Gearbox Drive Chain #5” on page 56 for detailed instructions. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 57 4. To help insure an accurate seeding rate, Great Plains recommends that you test and adjust your seeder per the seed rate calibration procedures provided on page 52.

  • Page 58: Section 7: Options & Accessories

    Assembly of Agitator Extension Paddles 802-092C RHSNB 5/16-18X3/4 GR5 Figure 7-2 803-177C NUT HEX FLG TP LK 5/16-18ZNYCR 890-401C SMV MOUNTING SOCKET Slow Moving Vehicle Sign Figure 7-4 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 59 2. Tighten locknut (#13) to the correct torque. locknut (#4) and adjust sprocket (#5) to tighten/ loosen chain (#6). 3. Check chain (#15) to ensure it is not over-tightened. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...
  • Page 60 3/8"-16 hex flange nut (#1) and adjust sprocket (#2) 6. Tighten bolt (#8) and then bolt (#7) to the correct to tighten/loosen chain (#3). torque for grade 5 bolts. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 61 Roller chains will change pitch length as they wear. this will cause the chains to climb on the sprockets and increase sprocket wear. Have your Great Plains dealer inspect chains for wear frequently. Always replace worn roller chains when needed.
  • Page 62 Support blocks must be tall enough to support spiked roller clamps (#2) above ground and must also allow roller wheels (#3) and roller clamps (#2) to turn freely. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 63 13. Shut tractor engine off and remove switch key. 10. Adjust roller wheels (#3) and roller clamps (#2) as follows: 14. Store support blocks for future roller wheel adjustments. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 64: Long Term Storage

    4. Oil the square bore of the seed cup drive sprocket hub to prevent seizing as noted under Lubrication Small Seed Rate Adjustment Lever & Seed Cups Points on page 62. Figure 8-12 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 65: Ordering Replacement Parts

    Great Plains’ NTS Seeder part numbers. For example, if ordering a replacement part that is green, the part number should read 555-555C81. Black parts do not get a suffix number. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 66: Lubrication Points

    Type of Lubrication: Multi-purpose Grease Quantity: 4 - 5 pumps 39416 Hours Rear Roller Right End Bearing 1 - Zerk Type of Lubrication: Multi-purpose Grease Quantity: 4 - 5 pumps NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 67 72252 Hours Native Seed Drive Sprocket Bearings 2 - Zerks Type of Lubrication: Multi-purpose Grease Quantity: 1 - 2 pumps every 25 hours the Native Seedbox is engaged. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 68: Roller Chains

    Type of Lubrication: Multi-purpose Grease Quantity: 4 - 5 pumps 1227 Roller Chains See Roller Chains & Sprockets on page 55 Type of Lubrication: Chain Lubricant Quantity: Coat Generously NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 69 Type of Lubrication: Multi-Purpose Grease Grease wheel bearings every 50 hours. 1 - zerk per wheel (zerk can be on either side) Quantity = 2 pumps Repack wheel bearings annually 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 70: Section 9: Specifications & Capacities

    Mud scrapers Bolt on mud scrapers on front and rear rollers. Signal lights LED (light-emitting diode) 7 Pin connector SAE J560 pin configuration Acremeter option Digital, battery operated. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...
  • Page 71 132 1/4" (336 cm) NTS2511 = 130 3/4" (332 cm) 4 1/2" (11.4 cm) NTS2507 = 97" (246 cm) NTS2509 =111 3/4" (284 cm) NTS2511 = 139 1/4" (354 cm) 39484 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 72: Section 10: Features & Benefits

    LED lights are bright, long lasting, and resistant to vibration, unlike incandescent LED Signal lights counterparts. Acremeter option Allows operator to see how many acres or hectares have been seeded. NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 73: Section 11: Troubleshooting

    Feed cup sprocket locked up or twisted Check for foreign matter lodged in seed cup sprocket. feed cup drive shaft. Rollers not turning freely. Check for trash or mud buildup on roller end. 7/1/19 NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M...

  • Page 74: Torque Values Chart For Common Bolt Sizes

    (1" Hex Flange Lock Nuts) necessary to allow the gang slide to move easily. See Angle” on page 33. Tire Inflation Chart Tire Size Inflation PSI 225/60R16 Recap NTS2507 , NTS2509, & NTS2511 s/n+ D1250L+ 2019+ NTS Seeder 313-900M 7/1/19...

  • Page 75: Warranty

    This warranty is not valid unless the unit is registered with Great Plains within 10 purchase. days from the date of the original IMPORTANT: The Online Warranty Registration should be completed by the dealer at the time of purchase.
  • Page 76 Great Plains, Mfg. 1525 E. North St. P.O. Box 5060 Salina, KS 67402...

This manual is also suitable for:

Nts2507Nts2511

Table of Contents

Save PDF