Advertisement
REVIB
3
INSTALL CPU CABINET
1.
POSITION CPU CAQIflET USING FOOTPRINT TEMPLATE.
8.
VERIFY THAT COOLING SYSTEM AIR FILTERS,
PLENUM,
SEE FIGURE 4.7?4.
BLOWER HOUSING,
AND AIR INTAKE LOUVERS ARE CLEAN
AND FREE FROM AflY OBSTRUCTIOflS.
REFER TO FIGURE
2.
VERIFY THAT CPU CABTNET,
FTGURE 4.7*4,
IS CLEAN
4 7 6
AND FREE OF FOREIGN MATERIAL.
9.
EHSURE THAT CABINET SHUTDOWN SWITCH,
LOCATED ON
3.
JOIN CPU CABINET TO MMU CABIEET
IN ACCORDANCE
:WITH SECTION 4.4.
4.
IF CPU CABINET
IS NOT BOLTED TO MMU CAQINET,
CONNECT GROUND CABLE FROM CPU TO MMU.
5.
AWEAR ESD STRAP AND VERIFY THAT ALL CIRCUIT BOARDS
so OR OGHZ, AS APPLICABLE.
REFER TO INSTRUCTION
6.
WEAR E50 STRAP Afii VERiFY THAT ALL FREE-EDGE
LABEL INSIDE COOLING FAN HOUSTNG AND FIGURE 4.7-5.
CONNECTORS ATTACHED TO CIRCUIT OOAROS ARE PROPERLY
SEATEO.
REFER TO EIOOEE 4.7»5.
7.
CAREFULLY REM©V£ CIRCUTT BOARD RESTRAINING TAPE (AND
ANY TAPE RESIDOE)
TO AVOIO BOARD DAMAGE AND PAINT
EEMOVAL.
Advertisement
