Dubbing Only Desired Scenes - Digital Program Editing - Sony GV-D800E Operating Instructions Manual

Dubbing only desired
scenes – Digital
program editing
You can duplicate selected scenes (programmes)
for editing onto a tape without operating the
other (recording) VCR.
Scenes can be selected by frame.
Unwanted scene/
Before operating the Digital program
editing
Step 1 Connecting the other (recording) VCR
(p. 50).
Step 2 Setting the other (recording) VCR for
operation (p. 51).
Step 3 Adjusting the synchronicity of the other
(recording) VCR (p. 57).
When you dub using the same (recording) VCR
again, you can skip steps 2 and 3.
Using the Digital program editing
function
Operation 1 Making the programme (p. 59).
Operation 2 Performing a Digital program
editing (dubbing a tape) (p. 61).
Notes
•The Digital program editing works only for
tapes recorded in the Digital8
•You cannot dub the display indicators.
•When you edit a digital video, the operation
signals cannot be sent with
•When you confirm the set-up video screen,
connect your (playing) VCR to a TV, or a
monitor using the super laser link function.
Step 1: Connecting the other
(recording) VCR
You can connect either the A/V connecting cable
or the i.LINK cable (DV connecting cable).
When you use the A/V connecting cable, connect
the devices as illustrated on page 46.
When you use the i.LINK cable (DV connecting
cable), connect the devices as illustrated on page
50
48.
Unwanted scene/
Switch the order/
system.
LANC.