MSI A75A-G45 Series Manual page 15

Mountng Screw Holes
When you nstall the manboard, you have to place the manboard nto the chasss n the
correct drecton. The locatons of screws holes on the manboard are shown as below.
The sde has to toward
the rear, the poston
for the I/O sheld of the
chasss.
Refer above pcture to nstall standoffs n the approprate locatons on chasss and then
screw through the manboard screw holes nto the standoffs.
Important
To prevent damage to the manboard, any contact between the manboard crcut and
•
chasss or unnecessary standoffs mounted on the chasss s prohbted.
• Please make sure there are no metal components placed on the manboard or wthn
the chasss that may cause short crcut of the manboard.
Screw holes
En-5