Tape; Amp - Sony RM-VZ950T Operating Instructions Manual

MD
KEY FUNCTION
qa1 To turn the power on/
off.
31 – 9, 0 To select the track
number. 0 selects track
10.
41-, -/-- (+10) To select numbers 10
and above.
qh (D.SKIP) To select the next disc.
6m To select the previous
track.
6N To play.
6M To select the next track.
7z To record, press N
while pressing z*. First
release N, then release
z.
6x To stop.
qfX To pause.
* You can assign this operation to a
single button (z) using the Learning
function (page 15).

TAPE

KEY FUNCTION
30 (REV PB) To play in reverse mode.
qh (A/B) To select deck A/B**.
6m To rewind.
6N To play.
6M To fast-forward.
7z To record, press N
while pressing z*. First
release N, then release
z.
6x To stop.
qfX To pause.
* You can assign this operation to a
single button (z) using the Learning
function (page 15).
**If you cannot select deck A/B, see
page 14.

AMP

KEY FUNCTION
qa1 To turn the power on/
off.
8 Jog dial To select the input
source**: Changes every
time the Jog dial is
pressed.
qgPROGR +/– Presetting or tuning
(BAND +/–) frequency up: +
Presetting or tuning
frequency down: –
qh (SHIFT) To shift band or
presetting select.
92 +/– Volume up: +
Volume down: –
q; To mute the volume on
the AMP. Press again to
turn muting off.
**If the input source does not have
remote control signals (preset or
"learned"), it is not displayed.
• VIDEO 1
• VIDEO 2
• AUX
• TUNER
• CD
• TAPE
• DVD
• TV
• PHONO
• INPUT
41
GB