Basic Operations; Setting The Component Codes; Setting By Entering The Code Number - Sony RM-VZ950T Operating Instructions Manual

Basic Operations

Setting the
Component Codes
The Commander is preset at the
factory to operate Sony brand AV
components (see the table below).
You can use the Commander with
other preset AV components also.
If you are using the Commander
with a factory-set Sony
component, skip the following
procedures.
To use with other AV components,
you need to follow the procedures
to set the correct codes for each
component.
You can set 8 different
components to 8 Setting position
numbers (S-1 to S-8).
Setting Display
position
number
S-1 TV
S-2 SAT
(Satellite tuner)
S-3 VCR
(Video player)
S-4 DVD
S-5 CD
S-6 MD
S-7 TAPE
(Cassette
deck*)
S-8 AMP
(Amplifier)
* Analog audio compact cassette deck
Note
See "Table of Preset Functions" (page
38) for the functions of buttons as for
each component.
8
GB
Factory setting
Sony TV
Sony SAT
Sony VHS
VCR
Sony DVD
player
Sony CD
player
Sony MD deck
Sony cassette
deck
Sony amplifier
Setting by entering the
code number
Tip
You can also press b/B instead of
turning the Jog dial to the left/right.
You can also press OK instead of
pressing the Jog dial.
7
Jog
dial
2