Generac Power Systems MAGNUM MTT20IF4 Operating Manual page 32

This table lists the parameters needed to schedule an event and to adjust the clock within the controller.
Note: If parameter 902 is "0", then the auto exercise timer is enabled and if it is "1", then the autolight timer is enabled.
Parameter
901 Enable Scheduler
902 Schedule Run On or Off Load
903 Schedule Period
904 Scheduler (1) Start Time
905 Scheduler (1) Start Day
906 Scheduler (1) Start Week
907 Scheduler (1) Duration
908 Scheduler (2) Start Time
909 Scheduler (2) Start Day
910 Scheduler (2) Start Week
911 Scheduler (2) Duration
912 Scheduler (3) Start Time
913 Scheduler (3) Start Day
914 Scheduler (3) Start Week
915 Scheduler (3) Duration
916 Scheduler (4) Start Time
917 Scheduler (4) Start Day
918 Scheduler (4) Start Week
919 Scheduler (4) Duration
920 Scheduler (5) Start Time
921 Scheduler (5) Start Day
922 Scheduler (5) Start Week
923 Scheduler (5) Duration
924 Scheduler (6) Start Time
925 Scheduler (6) Start Day
926 Scheduler (6) Start Week
927 Scheduler (6) Duration
928 Scheduler (7) Start Time
929 Scheduler (7) Start Day
930 Scheduler (7) Start Week
931 Scheduler (7) Duration
932 Scheduler (8) Start Time
933 Scheduler (8) Start Day
934 Scheduler (8) Start Week
935 Scheduler (8) Duration
1001 Time of Day
1002 Day of Month
1003 Month of Year
1004 Year
32
Description
Configuration Parameters - Scheduler
Configuration Parameters - Time and Date
Details
On (1), Off (0)
On (1), Off (0)
Weekly (0), Monthly (1)
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
0 (1=Monday)
1,2,3,4
0:00:00
0:00:00
1-31
1-12
0-99