Power Supply Connection And Cut Off - Jolly X-5 Coupe User Manual

The projector can be placed directly on the stage floor or rigged in any orientation on atruss without alte-
ring its operation characteristics.
For overhead use,always install a safety-rope that can hold at least 10 times the weight of the fixture.You
must only use safety-ropes with screw on carabines.Pull the safety-rope through the two apertures on the
bottom of the base and over the trussing system etc.
1
3
4

4.3 Power supply connection and cut off

Connect the light source to the main power source with the plug of the power cord, or cut off the power
supply:
Connection: according to procedures, the power plug and socket is inserted into the groove one one
alignment, rotation.
Cut off: according to procedures, press the button on the rotating plug, pull out.
2
1
2
1
3
2
1
2
3
4
Warning: it is necessary to make sure that
the installation location is perfectly appropriate,
and the installation location is safe and reliable.
Lock catch
omega holder
secure chain
mounting plate
5