Table of content 1.Open-Package guidelines............1 1.1Package................1 2.Safety instructions..............1 3.Operating determination.............3 4.Rigging the fixture...............4 4.1 Mounting.................4 4.2Installing the Clamps..............5 4.3 POWER Connection..............6 Description of the device..............7 Dimension..................8 Display control................9 Navigation in the Menu............9 Display OPeration..............9 Menu Maps ................10 8.DMX protocol................11 9.Maintenance and cleaning............11 10.Electric equipment specification..........12...
1.Open-Package guidelines Congratulations on choosing our products! Please carefully read this instruction manual in its entirety and keep it well for using reference.This manual contained about the installation and the relative using inform ation of this products.Please according to this manual's relative speaking when using this equipment.
Secure chain mounting plate omega holder 4.3 POWER Connection If you wish to change the power supply settings,see the chapter Appendix Connect the fixture to the mains with the enclosed power cable and plug. The earth has to be connected! DMX-512 Connection DMX-512 connection/connection between fixtures Only use stereo shieded cable and 3-pin XLR-plugs and connectors in order to connect.
7.Display control 7.1 Navigation in the Menu The Control Board o ers several features: you can simply set the starting address, switch on and off the lamp, run the preprogrammed program or make a reset. The main menu is accessed by pressing the Mode-button until the display starts ashing.
DMX Mode With this function, you can selec to work with mode 1 or mode 2 Reset default With this function, you can set the Reset on or o. Display settings With this function you can shut o the LCD display after 2 to 59 minutes. Turn the encoder in order to select the desired shut o time.