Table of content 1.Open-Package guidelines............... 1.1Package....................1 2.Safety instructions..................1 3.Operating determination.................3 4.Rigging the fixture...................4 4.1 Mounting.....................4 4.2Installing the Clamps................4 4.3 Power supply connection and cut off...........5 4.4 Power Connection................6 4.5 DMX-512 connection/connection between fixtures......6 Description of the device............
Page 4
Congratulations on choosing our products! Please carefully read this instruction manual in its entirety and keep it well for using reference. This manual contained about the installation and the relative using information of this products. Plese refere this manual's relative instruction when using this equipment.
1.Open-Package guidelines This equipment is made of new style,high intensity plastic.It fully shows the modem times light charac teris- tic with teristic with beauty struture. And it is made accord to CE standard. Fully agree with the internation standard of DMX 512 agreement.
Page 6
Never let the power-cord come into contact with other cables! Handle the power cord and all connections with particular caution! Make sure that the available voltage is not higher than stated on the rearpanel. Always plug in the power plug least. Make suer that the power-switch is set to off-position before you con ections with themains with particular caution! Make sure that the power-cord is never crimped or damaged by sharp edges.Check the decice and the p- ower-cord from time to time.
Disposing This product is supplied in compliance with European Directive 2012/19/EU-Waste Electrical and Electronic Equipment (WEEE). To preserve the environment please dispose/recycde this product at the end of its life according to the local regulation. Battery This product contains a rechargeable lead-acid or lithium iron tetraphosphate battery. To pre- serve the environment,please dispose the battery at the end of its life according to the regul- ation in force.
4.Rigging the fixture 4.1 Mounting Pay attention to the regulations of CE. Installation by qualified staff to complete. For the various mounting positions of the FIXTURE(standing on the floor, sideways or hanging different accessories kits are available. Through this a safe and firm installation is assured. You’ll find special connectors on the bottom side of the system which are put to use here.
The projector can be placed directly on the stage floor or rigged in any orientation on atruss without alte- ring its operation characteristics. For overhead use,always install a safety-rope that can hold at least 10 times the weight of the fixture.You must only use safety-ropes with screw on carabines.Pull the safety-rope through the two apertures on the bottom of the base and over the trussing system etc.
4.4 Power Connection If you wish to change the power supply settings, see the chapter appendix Connect the fixture to the mains with the enclosed power cable and plug. Warning: please verify the power of the power supply equipment prior to the connection! Earth wire must be grounded! CABLE(EU) CABLE(US)
DMX Terminator Diagram -For installations where the DMX cable has to run a long distance or is In an electrically noisy environment it is recommended to use a DMX terminator. This help in preventing corruption of the signal by electrical noise. The DMX terminato r is simply an XLR plug witha Ω...
7.Display control 7.1 Navigation in the Menu Using the buttons or touch screen, and this can be simply and easily set the address code and functions code. If you view or modify the lighting feature set, then press ENTER button, the display will enter the menu interface.
Page 14
This lamp can be set to turn off the automatic flip screen function, touch this " “ icon can be manually flip screen. Click on the main interface of the icon, numerical to view view Settings related information of lamps and lanterns.Symbols such as the main interface appear “...
7.3 Menu list Remark DMX Address DMX Address 001~XXX STANDARD 1~19 Channel Mode default Mode1 SHAPES 1~30 EXTENDED 1~31 Fixture Id 0001~XXXX Lamps address XXXXX h XX m Total working hours Fixture Times Reset LED Time Reset Lamp Time Error List Error details BOARD 1: XX.XX% Diagnosis...
8.DMX protocol Mode1 Mode 2 Mode3 Fade Type Function Value Black→Red 0-100% 0-255 Red fine Red fine 0-255 Green Black→Green 0-100% 0-255 Green fine Green fine 0-255 Blue Black→Blue 0-100% 0-255 Blue fine Blue fine 0-255 White Black→White 0-100% 0-255 White fine White fine 0-255 Note: If CTO channel is active, the WHITE channel is disabled.
Page 17
Mode1 Mode 2 Mode3 Fade Type Function Value Spring Yellow 110-111 Light Amber Straw Deep Amber Orange 115-116 Light Rose English Rose Light Salmon Middle Rose Dark Pink 121-122 Magenta 123-124 Peacock Blue Med Blu Green Steel Blue Light Blue Dark Blue 129-130 Leaf Green...
Page 18
Mode1 Mode 2 Mode3 Fade Type Function Value Dimmer Dimmer 0-100% 0-255 Dimmer Dimmer Fine 0-255 Fine 0-255 Pan Fine Pan Fine 0-255 Tilt Tilt 0-255 Tilt Fine Tilt Fine 0-255 The functions are actived passing through the “unused range” and staying 5 seconds Function off –...
Page 19
Mode1 Mode 2 Mode3 Fade Type Function Value stop 0-63 max to min speed,Closing effect 64-158 Shape Speed STOP 159-160 min to max speed,Opening effect 161-255 Shape R Shape R 0-255 Shape G Shape G 0-255 Shape B Shape B 0-255 Shape W Shape W 0-255...
Page 20
Function The functions are actived passing through the “unused range” and staying 5 seconds. Function Dmx Value Function off -rearmed 0-11 Pan Tilt Fast (Default) 12-24 Pan Tilt Normal 25-37 Dimmer Curve 1 38-42 Dimmer Curve 2 43-47 Dimmer Curve 3 48-52 Dimmer Curve 4 53-57...
9.Maintance and cleaning DANGER:Disconnect from the mains before starting any maintenance work. It is absolutely essential that the fixture is kept clean and that dust,dirt and smoke fluid residues must not buildup on or within the fixture. Otherwise, the fixtures light-output will be significantly reduced. Regular cleaning will not only ensure the maximum light-output, but will also allow the fixture to function reliably through out its life.
10.4 Menu Function 1.Touch screen,English menu. 2.DMX values and communication quality values can be displayed in each channel.. 3.Monitor could ON/OFF automatically. 4.Show fixture use time. 5. After the DMX signal is disconnected, the display will be bright and dark. 6.The screen can be set automatically to flip or hand over.
11.Electronic drawing Standard edition Titl En Pan En Titl Sensor Pan Sensor RS485 BUS Foucs Motor 1&2&3 90 Fan Titl Motor Motor 60 Fan2 60 Fan1 Wireless Receive Display Board Board Battery - 19 -...
Page 24
Online edition Titl En Pan En Titl Sensor Pan Sensor Foucs RS485 BUS Motor 1&2&3 90 Fan Titl Motor Motor 60 Fan2 60 Fan1 Wireless Receive Display Board Board Battery - 20 -...
Page 25
Note: The above contents for reference only and is subject to change without prior notice, please take specification you have on hand and our company reserves the final right of interpretation.