lumishore Shorelite X18 Installation Manual

Shorelite X18 / X36 / X90 Installation Guide
DOC NO: LSIN-09-010A
Shorelite x18 / x36 / x90 Installation Guide
Important – Please read Individual Product Instructions carefully before installation.

General Safety Information:

Please consider these safety precautions carefully before proceeding with the installation.
 High Intensity LED light – Do not stare into the led module at close proximity.
 All installation should be carried out by a qualified professional, to ensure installation with the
utmost care and caution. If in doubt please contact Lumishore ltd.
 The Shorelite electronics have been designed to be 12V DC only. Always ensure that you have
the correct module for your power supply prior to installation and under no circumstances
connect a unit directly to the mains voltage.
 Always ensure that the shore power source and / or battery are disconnected or isolated prior
to installation.
 Always use a suitable fuse or circuit breaker.
 The Lumishore Shorelite has been designed as an underwater light module. Please note that
running the device out of water for more than 60 seconds will cause the device to become hot
and switch itself off.
Warning: DO NOT OPERATE THE SHORELITE OUT OF WATER FOR MORE THAN 60 SEC.