Related Manuals for lumishore THX301
Summary of Contents for lumishore THX301
- Page 1 Single Colour Light THX301 Flush Fit Thru-Hull Lights Installation and Operation Guide THX301...
- Page 2 Over voltage/current, reverse polarity, and thermal rollback protection PACKING LIST If any of the following items are missing, email or call LUMISHORE using the information provided in the Product Support Section. THX301 light, Driver, Installation and Operation Guide ACCESSORIES...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Number Section Page BEFORE YOU START THX301 FLUSH FIT THRU-HULL LIGHTS Materials and Dimensions LIGHT INSTALLATION OPTIONAL DELRIN ISOLATION SLEEVE DRIVER INSTALLATION ELECTRICAL CONNECTIONS Cable Size (gauge) Connection example MAINTENANCE PRODUCT SUPPORT INQUIRIES SPECIFICATIONS 10.0 WARRANTY 11.0... -
Page 4: Before You Start
Never try to install or remove the light module with the vessel in the water. All LUMISHORE products should have bonding to the DC system via bonding strap for galvanic protection. Do not over tighten the retaining bolts. A force of 3nM on each bolt should not be exceeded. -
Page 5: Thx301 Flush Fit Thru-Hull Lights
2.0 THX301 FLUSH FIT THRU-HULL LIGHTS Bonding Attention: LUMISHORE lights must be bonded to the vessels DC Bonding system to ensure protection from electrolytic/galvanic corrosion. All bonding connections should be fully checked prior to returning the vessel to the water. -
Page 6: Light Installation
3.0 LIGHT INSTALLATION 1. Drill a 1-inch (26mm) perpendicular hole through the hull. 2. The exposed inner hull surface must be properly sealed to prevent water intrusion into the hull before the light module is secured in place. 3. Before inserting the light ensure that the hull surface is free from dirt and grease, and remove any existing anti-foul from the hull surface. -
Page 7: Optional Delrin Isolation Sleeve
4.0 OPTIONAL DELRIN ISOLATION SLEEVE Assembly of the isolation sleeve should be carried out just prior to installation of the light to the vessel. NB: the hole cut out required for the isolation sleeve is 1.3” (32mm). 1. After drilling the 1.3” (32MM) hole, measure the thickness of the hull, ensure that the isolation shaft sleeve is less than the hull thickness. -
Page 8: Driver Installation
5.0 DRIVER INSTALLATION THX301-Driver Current Draw per module with light connected: 12VDC – 3.75A / 24VDC – 1.8A Cable length 3.5 Feet IMPORTANT: Ensure correct electrical cable polarity, Incorrect installation will invalidate warranty. a. Install the driver in a dry and ventilated area inside the vessel. -
Page 9: Electrical Connections
6.0 ELECTRICAL CONNECTIONS 6.1 Cable size (Gauge) LUMISHORE lights have advanced electronic systems which maintain the illumination output of the LED’s to protect them from under current or voltage. Note: Current Draw per module with a light connected: 12VDC – 3.75A / 24VDC – 1.8A ... -
Page 10: Connection Example
6.2 Connection Example Page 10... -
Page 11: Maintenance
The locking nut and retaining bolts should be inspected on a regular basis to ensure they are kept tight. LUMISHORE recommends general inspection of the light module, driver and cable attachments every month. The glass lens should be kept clean with a plastic scraper or soft brush. Regular cleaning of the lens will ensure that the light module delivers maximum optical output. -
Page 12: Warranty
10.0 WARRANTY LUMISHORE Ltd warrants the THX301 to be free from defects in workmanship and materials for a period of two years, starting from the date of original purchase. Should your lighting system have a problem during this period, please contact your dealer as soon as you become aware of the defect. - Page 13 Notes Page: Page 13...
- Page 14 THANK YOU FOR PURCHASING LUMISHORE LIGHTS! Scan with your smart phone to link to THX301 Single Color Home page Lumishore USA Lumishore Ltd (Americas Enquiries) Head Office 7137 24 Court East Unit 11, Technium 1 Sarasota, FL 34243 King's Road www.lumishore.com...
Need help?
Do you have a question about the THX301 and is the answer not in the manual?
Questions and answers