Sony RM-LJ312 Primary Operating Instructions Manual page 25

1
Press RM SET UP.
The set up list appears.
cIR SET
LEARNING
DOWNLOAD
INPUT LIST
2
Move the easy scroll key to select
"AUTO POWER", then press the key to
enter the selection.
The AUTO POWER list appears.
<AUTO POWER>
cOn
Off
3
Move the easy scroll key to select "On"
or "Off", then press the key to enter the
selection.
When you select "On", the TV INPUT list
appears.
<TV INPUT>
cTV-VIDEO1
TV-VIDEO2
TV-VIDEO3
4
Move the easy scroll key to select the
video input of the TV, then press the
key to enter the selection.
When you want to select component video
input, select TV-COMPO1 or 2.
Notes
• Switching to VIDEO1–6 input may not be automatic
on all Sony TVs. This is because some TVs cannot
receive remote control codes immediately after being
turned on.
• When you select "(Off)" in step 4, the TV input does
not switch.
Turning the backlight on or off
Each time you press a button on the remote, the
backlight turns on. If you do the procedure
below to turn off the backlight, you can make the
batteries last longer.
1
Press RM SET UP.
The set up list appears.
cIR SET
LEARNING
DOWNLOAD
INPUT LIST
2
Move the easy scroll key to select
"BACK LIGHT", then press the key to
enter the selection.
The BACK LIGHT list appears.
<BACK LIGHT>
cOn
Off
3
Move the easy scroll key to select "On"
or "Off", then press the key to enter the
selection.
Adjusting the contrast of the
display
You can adjust the contrast of the display.
1
Press RM SET UP.
The set up list appears.
cIR SET
LEARNING
DOWNLOAD
INPUT LIST
2
Move the easy scroll key to select
"CONTRAST", then press the key to
enter the selection.
<CONTRAST>
c+
-
3
Move the easy scroll key to select "+"
or "–", then press the key to enter the
selection.
Each time you press the key, the contrast of
the display changes. To exit adjusting,
move the easy scroll key to select "Exit",
then press the key to enter the selection.
continued
GB
25