Adding A Command That Is Required When Selecting A Component - Sony RM-AV2000T Operating Instructions Manual

Adding an Extra Function to the
Component Select Buttons
(continued)
Adding a Command that is
Required when Selecting a
Component
In addition to the original function of
selecting the operating keys and buttons
of the desired component, the
Component Select button can have
another remote control signal by
"learning" (see page 12).
For example, if you always have to
change input select of the amplifier to CD
when listening to the CD player, program
the signal of "changing the amplifier's
input select" to the CD button of this
Commander. Then whenever you press
the CD button, it automatically works as
the original CD Component Select button
and changes also the amplifier input
select to CD.
SYSTEM CONTROL
1
TV
3
AMP
EN
24
COMMANDER
e
OFF
2 3
VCR1 VCR2 VCR3 DVD SAT/CBL
CD MD/DAT DECK B/A TUNER
Á
PROGRAM
+ +
+
– –
=
¤
Example : To program the input
select signal of your amplifier to
the CD button
1
Remote control of
your component
about 5 – 10 cm
(2 – 4 inches) away
2
5
3
DSP
2
Place the RM-AV2000T head to
head with your component's
remote control.
While pressing COMMANDER
OFF, press Á + and PROGRAM
+.
COMMANDER
+
OFF
+
"LEARN" appears and all the
component names flash.
LEARN NG TV VCR123
AMP MD CBL
SC1 SC2 SC3
Press the desired Component
Select button.
CD
The selected component name stays
lit and "LEARN" flashes.
LEARN NG
RM-AV2000T
Á
PROGRAM
+
+
+
DVD SAT DECK
AB
CD FM/AM DSP
CD