Changing The Programme Order Of The Tv Channels; Manually Tuning The Tv; Fine Tuning Channels; Skipping Programme Positions - Sony Trinitron KV-14FV1U Instruction Manual

Changing The Programme Order Of The
TV Channels
The "Programme Sorting" option in the "TV Set Up" menu allows you to change
the order in which the channels (TV Broadcast) appear on the screen.
To do that: by using the menu system and after selecting the option, press
proceed in the same way as in the section "Switching On the Video TV and
Automatically Tuning" (see step 5b) on page 6).

Manually Tuning The TV

The "Manual Programme Preset" option in the "TV Set Up" menu allows you to
preset channels one by one to the programme order of your choice. To do that:
1 By using the menu system and after selecting the "Manual Programme Preset"
option, press . Then with Programme option highlighted press
to select on which programme number you want to preset the channel. Then press
.
2 After selecting the Channel option, press
channel tuning ("C" for terrestrial channels or "S" for cable channels). Next press
After that, press the number buttons to directly enter the channel number of the TV
Broadcast. If you do not know the channel number, press
When you tune the desired channel, press OK twice to store.
• Repeat all the above steps to tune and store more channels.

Fine Tuning Channels

Normally the Automatic Fine Tuning (AFT) is operating, however by using the
"Manual Programme Preset" option in the "TV Set Up" menu you can manually
fine tune the Video TV to obtain a better picture reception in the case that the
picture is distorted.
To do that: while watching the channel (TV Broadcast) you wish to fine tune, and by
using the menu system select the "Manual Programme Preset" option. Press
the AFT option highlighted, press
between -15 and +15. Finally press OK twice to store.

Skipping Programme Positions

The "Manual Programme Preset" option in the "TV Set Up" menu allows you to
skip any unwanted programme numbers when they are selected with the PROGR
+/- buttons.
To do that: by using the menu system and after selecting the "Manual Programme
Preset" option, press . Then with the Programme option highlighted press
press or to select the programme number you want to skip. Press
the Skip option and press
to confirm and store.
• To cancel this function afterwards, select "No" instead of "Yes" in the step above.

Setting Pay-TV Channels

The "Manual Programme Preset" option in the "TV Set Up" menu allows you to
watch Pay-TV channels by connecting a Pay-TV decoder to the Scart connector
:1/ on the rear of the Video TV.
To do that: by using the menu system and after selecting the "Manual Programme
Preset" option, press . Then with the Programme option highlighted, press
press or to select the programme number with the scrambled channel and press
. Select the Decoder option and press
press OK twice to confirm and store.
• While you are recording a programme which is being recorded through the Pay-TV decoder, you will not
be able to view other programmes through the decoder.
8
TV Operation
. Then press
. Next press or
. Next press or to select Yes. Finally press OK twice
. Next press
and then
. Press or
or to select the
.
or to search for it.
. With
to adjust the fine tuning
. Next,
. Then, select
. Next
or to select On. Finally,
Programme Sorting
Programme: 01 -> 01
Confirm:
Select channel: PROG + -
Select new position:
OK
Manual Programme Preset
Programme: 01
System: I
Channel: C 21
AFT:
On
Skip: No
Decoder:
Off
Confirm
OK
Manual Programme Preset
Programme: 01
System: I
Channel: C 21
AFT: On
Skip: No
Decoder: Off
Confirm
OK
Manual Programme Preset
Programme:
01
System: I
Channel:
C 21
AFT: On
Skip: No
Decoder: Off
Confirm
OK
Manual Programme Preset
Programme:
01
System: I
Channel:
C 21
AFT: On
Skip:
No
Decoder: Off
Confirm
OK