(System Audio Control) Turning Off The Stand, Tv And The Connected Compornents; (System Power Off); Using The Power Saving Function - Sony RHT-G950 Operating Instructions Manual

Turning off the stand, TV
and the connected
compornents

(System Power Off)

When you turn the TV off by using the POWER
button on the TV's remote, the stand and the
connected components turns off automatically.
Tip
• If the TV is turned off and enters standby mode, the
power consumption of the stand will be reduced when
the power saving function is on.
Note
• Depending on the status, the connected components
may not be turned off. For details, see operating
instructions supplied with the connected components.
Downloaded From TheatreSystem-Manual.com Manuals
Using the power saving
function
If a "BRAVIA" Sync-compatible TV is
connected to the stand, and the stand is in active
standby mode, if the TV is turned off, HDMI
signal transmission stops, and power
consumption is reduced.
INPUT SELECTOR
CENTER SUBWOOFER
LEVEL
DISPLAY
RETURN
-
PRESET NIGHT DIMMER
-
TUNING
MUTING
VOLUME SOUND FIELD
1
Press AMP MENU.
2
X/x
Press repeatedly until "SET HDMI"
appears, then press
3
X/x
Press to select "POWER SAVE,"
then press or c.
4
X/x
Press to select the setting.
• ON: Reduces power consumption in
active standby mode. HDMI signal
transmission occurs only when the
TV is on.
• OFF: No reduction. HDMI signal
transmission occurs continuously
even if the stand is turned off (active
standby mode).
5
Press AMP MENU.
The AMP menu turns off.
AMP MENU
AMP
MENU
C, X, x, c,
MENU
+
PRESET
+
TUNING
or c.
continued
35
GB