(One-Touch Play) Enjoying The Tv Sound From The Stand; (System Audio Control) Turning Off The Stand, Tv And The Connected Components; (System Power Off) - Sony 4-170-060-12(1) Operating Instructions Manual

Enjoying the TV sound
from the stand
(System Audio Control)
You can enjoy the TV sound from the speakers
of the stand by means of a simple operation. You
can also adjust the volume and turn off the sound
of the stand using the TV remote. For details,
refer to the operating instructions of the TV.
INPUT SELECTOR
CENTER
DISPLAY
C, X, x, c,
RETURN
Press ?/1 to turn on the stand.
The sound is output from the speaker of the
stand. Sound output reverts to the TV's speaker
when you turn the stand off.
Notes
• When the TV is turned on before this stand is turned
on, the TV sound will not be output for a moment.
• Depending on the TV, when you adjust the stand's
volume using TV's remote, the volume level appears
on the TV screen, in the same way it would appear
when you adjust the TV's volume. In this case, the
volume level that appears on the TV screen and the
stand's front panel display may differ.
Using the Volume Limit
function
When the System Audio Control function is
active and the output method changes from the
TV speaker to the stand speakers automatically,
loud sound may be output depending on the
volume level of the stand. You can prevent this
by limiting the volume level.
1
Press AMP MENU.
2
X/x
Press repeatedly until "SET HDMI"
appears, then press
26
GB
?/1
SUBWOOFER
LEVEL
AMP MENU
AMP
MENU
MENU
or c.
3
X/x
Press repeatedly until "VOL LIMIT"
appears, then press
4
X/x
Press to select the volume limit you
want.
The volume limit changes as follows:
MAX y 49 y 48 ... 2 y 1 y MIN
5
Press AMP MENU.
The AMP menu turns off.
Notes
• This function is available only when the Control for
HDMI function is set to on.
• This function is not available when the output method
changes from the stand speakers to the TV speaker.
Tips
• We recommend that you set the volume limit to a little
lower than the volume you usually listen to.
• Regardless of the volume limit you set, the VOL +/–
buttons of the stand and the VOLUME +/– buttons of
the remote are operable.
• If you do not want to limit the volume level, select
"MAX."
Turning off the stand, TV
and the connected
components

(System Power Off)

When you turn the TV off by using the POWER
button on the TV's remote, the stand and the
connected components turn off automatically.
Note
• Depending on the status, the connected components
may not be turned off. For details, refer to the
operating instructions supplied with the connected
components.
or c.