Vector G08 Series Faq page 40

The Current Limiter boards are attached to the deflection board and are only discussed in the
Preliminary G08-003/004 Service Manual. Included below is the parts list. Not all of these parts are
necessary for a monitor rebuild, but are good to have on hand.
Horizontal Current Limiter
Location Description
D200 1N914
D201 1N914
D202 1N4935
D203 1N4935
Q201 2N3904
Q202 2N3904
R200 100-Ohm 0.25W Resistor
R201 100-Ohm 0.25W Resistor
R202 0.15-Ohm 2W Resistor
R203 0.15-Ohm 2W Resistor
C201 0.1mF 200V capacitor
G08 Vector Monitor Guide
Vertical Current Limiter
Location Description
D250 1N914
D251 1N914
D252 1N4935
D253 1N4935
Q251 2N3904
Q252 2N3904
R250 100-Ohm 0.25W Resistor
R251 100-Ohm 0.25W Resistor
R252 0.15-Ohm 2W Resistor
R253 0.15-Ohm 2W Resistor
C251 0.1mF 200V capacitor
Page 40 of 41