Installing A Cap Kit - Vector G08 Series Faq

INSTALLING A CAP KIT

Zanen Electronics
5023 52nd Street
Lubbock TX 79414
806-793-6337
Fax: 806-793-9136
Zanen Kit #110
Key:
•
Q = Transistor
•
R = Resistor
•
C = Capacitor (all polarized electrolytic)
•
F = Fuse
•
D = Diode
•
ZD = Zener Diode
Note that the capacitors come in two "types":
Note, if you cannot find an exact replacement for one of the capacitors, you may keep this in mind.
A capacitor with a difference that is less than 5% of the original value should work just fine. Back
in the days of the G08, electrolytic capacitors had tolerances that were typically over 20%. So a
modern capacitor will probably be a lot closer to the ideal value than the original cap that was in
the chassis when it was new.
Bob Roberts also sells cap kits. Bob provides a
kit for the G08 Vector Monitor.
bob147@bellsouth.net
http://www.therealbobroberts.com
_____
--| |--
~~~~~
axial-lead
_____
|
radial-lead |
+---+
| |
G08 Vector Monitor Guide
|
|
Page 26 of 41