Vector G08 Series Faq page 30

G08-003 HIGH VOLTAGE UNIT
Not all of these parts are necessary for a monitor rebuild, but are good to have on hand. For
capacitors, see "Cap Kit Summary" section above.
Location Part Description
ZD903 1N751 Zener Diode
ZD904 1N751 Zener Diode
Q900 Power transistor, 5A 1400V
Q901 2N3906
Q902 MPSU07
Q903 2N3904
L900 12 uH Horiz. Delay Choke
D901 Rectifier, 1A 1400V
G08-003 NECK BOARD
I have never had to replace a part on a neck board yet (seems it was the only board Electrohome got
right the first time). So, I have no recommendations for replacement parts.
NON-Zanen HV PCB Parts
Upgrade
G08 Vector Monitor Guide
Notes
Hitachi 14-601-36
Found on back of PCB
8 uH on G08-001
GI1-1400 (NTE506 cross)
Page 30 of 41