Table of Contents
Advertisement
8. CUSTOMIZATION
8-14. Setting Default Signal Out
Out to TV -- Default Connection
Lets you choose whether the OUT TO TV jack is connected to either the CABLE IN
or ANT IN jack in standby mode.
To set the standby mode default signal source:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using "
" on the remote control.
E
3. Select the Preference menu by pressing " ".
4. Scroll down to Out to TV using "
E
".
5. Move the highlight to the right with "
G
".
6. Select Antenna or Cable and press " " to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.
83
Advertisement
Table of Contents
