Setting Locks - Sony SAT-HD200 Operating Instructions Manual

8-17. Setting Locks

Lock System
Lets you set up specific channels, ratings and spending limits through blocking schemes.
Activates or disables all of the lock schemes previously set up. A password is required to gain
access to this menu if the lock system is activated. You can change the password by inputting
a new password twice. When the system is unlocked, the Block Channel, Program Rating and
Spending Limits are not effective.
To activate or deactivate the Lock System:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using "
3. Select the Lock menu by pressing " ".
4. If unlocked, Lock System will be automatically highlighted, otherwise requires a password.
To lock the system:
1. Move the highlight to the right with "
2. Switch On or Off by using "
you need to enter the password as a reminder.
To set the password:
1. Move the highlight to the Set Password with "
2. Enter the password by using the digit buttons on the remote control.
3. Enter the password again to verify the number.
5. Press " " to return to the previous screen or
F
press the Exit button on the remote control to return to TV viewing.
E " on the remote control.
" in Lock On/Off box.
G
" Whenever you switch the lock system on,
G
".
E
NOTE
Once you enter the password when
unlocking the blocked channel, it will
remain unlocked until the DIRECTV
High-Definition Receiver is off.
®
86