Table of Contents
Advertisement
3-4. Connecting to Antennas - Round Dish (Satellite A)
Antenna
Cable TV
wall jack
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV
RF cable.
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF
cable.
3. Connect the "Jack 1" of the dish antenna to the "SATELLITE IN" jack on the DIRECTV HD Receiver using
a coaxial RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your satel-
lite dish antenna.)
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
NOTE
While you are subscribing to a DIRECTV
gramming package, you can still view over-the-
air and cable TV programs, if you make con-
nections to the over-the-air and/or cable jacks.
®
High-Definition Receiver using a coaxial
NOTE
®
pro-
You may not be able to receive DIRECTV
Definition programming with a round dish.
A triple LNB multi-satellite dish antenna with a
SAT C LNB is required, along with this
DIRECTV HD Receiver and high-definition tele-
vision equipment.
LNB
Sat A
Dish
Jack 1
Phone wall jack
®
High-
24
Advertisement
Table of Contents
