Table of Contents
Advertisement
3-4. Connecting to Antennas - Oval Dish (Satellite A, B, C)
Antenna
Cable TV
wall jack
Receiving Signals
1. Connect the "Antenna" to the "ANT IN" jack on the DIRECTV
2. Connect the cable TV signal to the "CABLE IN" jack on the DIRECTV HD Receiver using a coaxial RF cable.
3. Connect the "Jack 1" of the multi-switch to the "SATELLITE IN" jack on the DIRECTV HD Receiver using a
coaxial RF cable. (For proper dish installation, refer to the "Installer's Guide" provided with your satellite dish
antenna.)
4. Connect the "Phone Wall Jack" to "PHONE JACK" on the DIRECTV HD Receiver using a phone cable.
NOTE
While you are subscribing to a DIRECTV
programming package, you can still view over-
the-air and cable TV programs, if you make
connections to the over-the-air and/or cable
jacks.
LNB
LNB
Sat A
Sat C
®
LNB
Sat B
Dish
5x4 Multi-switch
Output
Phone wall jack
®
High-Definition Receiver using a coaxial RF cable.
NOTE
For access to all DIRECTV
programming, a triple LNB multi-satellite
dish antenna with a SAT C LNB is required,
along with this DIRECTV HD Receiver and
high-definition television equipment.
®
High-Definition
26
Advertisement
Table of Contents
