Advertisement
The system will go through Device Initialization and Startup Wizard after powering up for the first time. The system will prompt to set the system's language, video standard, system login information as well as the system's general settings.
Please take note of the new admin password as it can only be reset by email and security questions. If password cannot be recovered, system has to go thru the RMA process and ship to the manufacturer for factory default.
Step
1
Step
Setup new password - (Please take note of the new password since
Language and Video Standard
tech support can't resset the password)
1
Step
Step
Welcome Screen click Next.
Configure the system's time and date settings to match the
location's time zone. Click Next to proceed.
2
2
Step
Change the default TCP/IP settings to match the local network.
Click the Test button to do a quick test on the configuration.
Click Next to proceed.
Device Initialization:
3
Step
Unlock pattern can be used to Login.
Startup Wizard:
3
Step
Enable P2P for remote viewing as required.
The status will say "online" if the network
settings are correct. Click Next to proceed.
EASY START-UP WIZARD
4
Step
Email and Security Questions setup.
Please make sure to setup these settings for password recovery.
4
Step
Configure the video recording schedule as required.
Click Back to return to previous step or Next to proceed.
Then click Finished.
5
Advertisement
