Denon PMA-600NE Owner's Manual page 27

Contents Connections
o Playback in ANALOG MODE
If analog mode is turned on when playing an analog input source
(PHONO, CD, NETWORK, AUX, RECORDER), power to the digital
input circuit and Bluetooth module is turned off. This enables you to
enjoy audio playback with high sound quality without sound quality
being affected by noise that occurs from the digital control circuit.
1
Press ANALOG MODE on the main unit to turn analog
mode on.
ANALOG MODE indicator lights.
Analog mode switches on or off each time the button is pressed.
0
Analog mode on:
Analog mode off:
Front panel Rear panel
Playback
The power of the digital input circuit and
Bluetooth module is turned off.
Analog mode is not used.
Remote control
unit
Settings
0 A digital input source ("COAXIAL", "OPTICAL 1", "OPTICAL 2") or "BLUETOOTH"
source cannot be selected when analog mode is on.
0 The input source automatically switches to "CD" if analog mode is turned on during
playback of a digital input source ("COAXIAL", "OPTICAL 1", "OPTICAL 2") or
"BLUETOOTH" source.
0 When the analog mode is switched, the mute circuit is activated for about 5
seconds.
27
Index
Tips Appendix