Sharp XL-DH259N Operation Manual page 13

Timer and sleep operation (Remote control only) (continued)
12
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is canceled.
Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack select
"USB" or "AUDIO IN" in step 8.
● This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn
on or off. To stop the timer playback, follow step
"Canceling the timer setting" of this page.
Checking the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
3
Within 10 seconds, press the
"TIMER CALL", and press the MEMORY button.
Canceling the timer setting:
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
3
Within 10 seconds, press the
"TIMER OFF", and press the MEMORY button. Timer
will be canceled (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
1
Turn the power on and press and hold down the
CLOCK/TIMER button.
2
Within 10 seconds, press the
"ONCE SET" or "DAILY SET", and press the MEMORY
button.
3
Within 10 seconds, press the
"TIMER ON", and press the MEMORY button.
4
Press the ON/STAND-BY button to enter the power
stand-by mode.
or button to select
or button to select
or button to select
or button to select
or button to select
or button to select
E-12
Sleep operation
The radio, compact disc, iPod and USB can all be turned
off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 10 seconds, press the SLEEP button repeatedly
to select the time.
10 20
4
"SLEEP" will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
1
While "SLEEP" is indicated, press the SLEEP button.
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is
indicated. To cancel the sleep operation without setting
the unit to the stand-by mode, proceed as follows.
1
While "SLEEP" is indicated, press the SLEEP button.
2
Within 10 seconds, press the SLEEP button repeatedly
to select "SLEEP 00".
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
1
Set the sleep time (see above, steps 1 - 5).
2
While the sleep timer is set, set the timer playback
(steps 2 - 9, page 11).
Timer playback
Sleep timer
setting
setting
90 minutes
Sleep operation will
automatically stop
30 ....... 80 90
Desired time
Timer playback
start time
End
time