Troubleshoot Electronic Controls Fault Codes
Fig. 5 - Mode Button will display Electronic Controls Fault Codes
Fault Code - "E1"
N10DCX
Complete the "Diagnostic Pre-Checks."
Make sure thermistor in the fresh food
compartment is connected.
Remove thermistor cover in fresh food
compartment and check connection of
thermistor wire to thermistor.
Is
thermistor
NO
wire
connected?
YES
Check connection of thermistor wire to
the refrigerator electronic controls.
Refer to the wiring diagram.
Is
thermistor
NO
wire
connected?
YES
Replace Thermistor.
Correct connection.
Correct connection.
24
E1
Possible Cause:
The fresh food thermistor is not
cycling properly.
www.norcold.com