Table of Contents
Advertisement
6
Return Line Water Flow
IMPORTANT: The water flow from your return line can push the 'Lil Rebel™ Aboveground Suction-Side Pool Cleaner's
hose and affect its performance. It may cause the cleaner to steer away from the end of the pool where the return
line is located, or it may cause your cleaner to remain in one section of the pool. To correct this, purchase the eyeball
diverter (P/N 41201-0236) from your local pool professional. If the eyeball does not fit your pool, use the wire diverter.
(P/N K121620) Wire diverter available for purchase from your local pool professional.
To install the eyeball diverter:
• First make sure your pool pump is off. Remove
the original eyeball from the return line at the
pool by unscrewing the lock ring.
• Replace the original eyeball with the eyeball
diverter that came with your cleaner.
• Replace the lock ring and tighten. Make sure
the opening of the eyeball diverter points in the
proper direction before tightening fully.
Eyeball Diverter Positions
Position the diverter opening to redirect the return line
water flow so it does not interfere with the cleaner's
movement. Try different positions to see which works
best in your pool:
• flow directed along the side of pool (the tile line).
• flow directed downward.
• flow directed against the hose will help steer the
cleaner away from obstructions such as stairs and
ladders.
After installing the eyeball diverter, turn the pool
pump on. The cleaner should begin moving across
the pool floor vacuuming up debris in its path.
'LIL REBEL™ Aboveground Suction-Side Pool Cleaner Installation and User's Guide
Eyeball Diveter (optional)
P/N 41201-0236
Lock
(Retaining)
Ring
Wire Diveter (optional)
P/N K121620
BEFORE ADJUSTMENT
TOP VIEW
AFTER ADJUSTMENT
TOP VIEW
Figure 10
Eyeball
Fitting
Eyeball Diverter
SIDE VIEW
SIDE VIEW
Figure 11
Return
Line
Hide quick links:
Advertisement
Table of Contents
