Table of Contents
Advertisement
Operating Your Camera
DAY/NIGHT: choose COLOR, BW or AUTO mode.
•COLOR : COLOR mode
•B/W : B/W mode
•AUTO : Under general condition, D/N filter is fixed at COLOR mode, but under low
luminance condition, it change into B/W mode automatically. The case of the
opposition is also same.
SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK.
In LINE-LOCK mode, it synchronizes the video signal between cameras without a
synchronous generator.
•INT : Internal synchronization
•LL : External line-lock synchronization
· If you choose 'LL', you can adjust the desired phase.
Press the SET button.
· You can adjust the desired phase from 0 to 359.
40
COLOR CCD CAMERA
User's Manual
Notes
• When the frequency of external 'SYNC' signal is 60Hz, you can use line-lock
mode(NTSC Models).
• When the frequency of external 'SYNC' signal is 50Hz, you can use line-lock
mode(PAL Models)
FREEZE: You can freeze to the scene. Move the arrow indicator to 'FREEZE' using UP or
DOWN button. Set 'FREEZE' mode to 'ON' using LEFT or RIGHT button. and
press SET button.
H-REV: You can make horizontal reverse to the scene. Move the arrow indicator to
'H-REV' using UP or DOWN button. Set 'H-REV' mode to ON using LEFT or
RIGHT button. and press SET button.
COLOR CCD CAMERA
41
User's Manual
Advertisement
Table of Contents
