Presetting Radio Stations - Sony STR-DB798 Operating Instructions Manual

Presetting radio stations

You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Turn INPUT SELECTOR to select FM or
AM band.
The last received station is tuned in.
2
Tune in the station that you want to
preset using automatic tuning
(page 23) or direct tuning (page 24).
3
Press MEMORY/ENTER.
"MEMORY" indicator lights up in the
display for a few seconds. Do steps 4 to 5
before the indication turns off.
4
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select a preset
station number.
Each time you press the button, you can
select the preset station number as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
If "MEMORY" indication turns off before
you select the preset station number, start
again from step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric buttons to select a preset number.
5
Press MEMORY/ENTER again.
The station is stored to the selected preset
number.
If "MEMORY" indication turns off before
you press MEMORY/ENTER, start again
from step 3.
6
Repeat steps 2 to 5 to preset another
station.
Tuning to preset stations
1
Turn INPUT SELECTOR to select FM or
AM band.
The last received station is tuned in.
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Each time you press the button, you can
select the preset station as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
Using the remote
1
Press TUNER repeatedly to select FM or
AM band.
2
Press PRESET/CH/D.SKIP +/– repeatedly
to select the preset station you want.
To select the preset station
directly
Press the numeric buttons on the remote.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
25 GB