Jeep CHEROKEE 2019 User Manual page 99

The TPMS consists of the following compo-
nents:
• Receiver module
• Four tire pressure monitoring sensors
• Various tire pressure monitoring system
messages, which display in the instrument
cluster
• Tire Pressure Monitoring System Warning
Light
Tire Pressure Monitoring Low Pressure Warn-
ings
The "Tire Pressure Monitoring
Telltale Light" will illuminate in
the instrument cluster and a
chime will sound when tire pres-
sure is low in one or more of the
four active road tires. In addition, the instru-
ment cluster will display a "Tire Low" message
for a minimum of five seconds, an "Inflate to
XX" message and a graphic showing the pres-
sure values of each tire with the low tire
pressure values in a different color.
Tire Pressure Monitoring Low Pressure
Warning
Should this occur, you should stop as soon as
possible and inflate the tires with low pres-
sure (those in a different color in the instru-
ment cluster graphic) to the vehicle's recom-
mended cold placard pressure value as
shown in the "Inflate to XX" message. Once
the system receives the updated tire pres-
sures, the system will automatically update,
the pressure values in the graphic display in
the instrument cluster will return to their
original color, and the "Tire Pressure Monitor-
ing Telltale Light" will turn off. The vehicle
may need to be driven for up to 20 minutes
above 15 mph (24 km/h) in order for the
TPMS to receive this information.
NOTE:
When filling warm tires, the tire pressure may
need to be increased up to an additional 4 psi
(28 kPa) above the recommended cold plac-
ard pressure in order to turn the Tire Pressure
Monitoring Telltale Light off.
Service TPMS Warning
When a system fault is detected, the "Tire
Pressure Monitoring Telltale Light" will flash
on and off for 75 seconds and then remain on
solid. The system fault will also sound a
chime. In addition, the instrument cluster
will display a "SERVICE TPM SYSTEM" mes-
sage for a minimum of five seconds and then
display dashes (- -) in place of the pressure
value to indicate which sensor is not being
received.
If the ignition key is cycled, this sequence
will repeat, providing the system fault still
exists. If the system fault no longer exists, the
"Tire Pressure Monitoring Telltale Light" will
no longer flash, and the "SERVICE TPM SYS-
97