Advertisement
Removing and Replacing Glide racks
The Glide rack allows you to easily slide bakeware in and out to
check food or to remove or place items while firmly holding
even heavier items in place. The rack is held in place securely
and will not extend beyond the glide stop position unless it is
released manually.
To remove - Make sure the baking rack is in the closed position.
Using one hand, reach through handle opening and grasp both
the upper and lower portions of the glide rack as shown in
Figure 4.
Figure 4: Grasp both rack sections
While holding both sections, pull the glide rack out of the oven
until the stop position is reached (Figure 5).
Figure 5: Pull rack to stop position
Using both hands, lift up the front of the rack slightly and
continue to pull the rack away from the oven (Figure 6). Be sure
to grasp both upper and lower rack portions together when
removing or handling the glide rack,
Before Using Oven Controls
Figure 6: Correct angle for removing or inserting the Glide
rack.
The rack portions move independently and should be held
together when removing and replacing.
To replace - Make sure the baking rack is in the closed position.
Grasp both upper and lower portions of glide rack. Lift and
hold the rack level between the oven cavity walls. Tilt the front
of the rack upward slightly and slide the rack completely into
position.
Important: To prevent possible damage to the oven, do not
attempt to close the oven door until all the oven racks are fully
positioned back inside the oven cavity.
13
Advertisement
