Download Print this page

Kenmore 790.4897 Series Use & Care Manual page 17

Advertisement

Accela Heat™
Use the AccelaHeat feature whenever you wish to start baking
immediately, without the need for preheating. This feature
provides good results for single rack cooking. It can be used for
fresh and convenience foods, such as cinnamon rolls, frozen
pizza, bacon, french fries, and tater tots. Food will finish baking
in the time stated in the cooking directions without the addi-
tional time ordinarily required for preheating.
During AccelaHeat, the fan will pulse on and off, and the bake,
broil, and convection elements will cycle on and off to maintain
the set temperature for precise baking.
Important: For batter and dough-based baked goods such as
cakes, pastries, and breads, use the convection function for best
results.
AccelaHeat may be set for any oven temperature between
200°F (93°C) to 550°F (288°C).
AccelaHeat best practices:
Follow the package directions for food preparation time
and temperature. AccelaHeat works best when cooking
foods longer than 10 minutes. If directions call for a shorter
cooking time, a few extra minutes may be required for
optimal cooking results.
Always place the food in the oven on rack position 2 using
the glide rack or 3 using the flat rack. AccelaHeat is
designed for baking on a single oven rack.
Place food toward the front of the rack for optimal cooking
results.
When using AccelaHeat, use bakeware with low or no sides.
This allows the air to circulate around the food evenly.
Food that comes in strips, such as fish sticks and chicken
tenders, should be placed on the pan with the ends pointing
to the sides of the oven.
Do not open the oven door often. Opening the door will
reduce the temperature in the oven and may increase bake
time.
Leave oven light off while baking.
Always use pot holders or oven mitts when using
the oven.When cooking, the oven interior and oven racks will
become very hot which can cause burns.
To set Accela Heat™:
1.
Remove food from packaging and arrange on baking pan.
2. Place pan in oven on rack position 2 Glide rack or 3 Flat
rack
(Figure
7) and close oven door. AccelaHeat is
designed for baking on a single oven rack.
3. Press Upper or Lower oven.
4. Press Accela Heat key.
5. Enter desired temperature.
6. Press
. Baking will begin immediately.
7.
To stop baking press
Figure 7: Rack positions
17
Oven Controls
.
6
5
4
3
2
1

Advertisement

loading