Access Control - Magnocomp magDomus MGD2 Series User Manual

IP address The device IP (IPv4) address. This is not required when using DHCP.
NetMask The network mask. This is not required when using DHCP.
Gateway The local address of the network gateway. This is the internal
DNS1
DNS2
After adjusting the parameters according to requirements, press the Save button to store the
network parameters or the Discard button to leave parameters unchanged.

Access Control

You can adjust the security setting using the the option "Access Control" in the magDomus Setup
page.
A local network should not include two magDomus devices with
the same name.
This name must start with a letter and the other characters can
include letters or numeric characters. Spaces are not allowed.
address of the router or equipment that connects the internal
network to the Internet. This is not required when using DHCP.
Addresses for the Domain Name Servers. These are not required
when using DHCP.
Fig. 7. The Access Control setup window