Client Setup
Depending on your previous security setting, you may need to enter a administrator password to
access the magDomus setup page. The factory default administrator credentials are:
User
Password
By submitting administrator credentials, you should be redirected to the magDomus Setup
page:
magDomus Setup
●
Home Automation
●
Network
●
Access Control
●
Date and Time
●
Scheduler
●
Reboot device
●
User Manual
●
magnocomp Web Portal
Network Setup
To configure the network connection select the option "Network" in the configuration application.
The following network parameters can be defined:
DHCP Use the Dynamic Host Configuration Protocol (DHCP).
Name The device name.
admin
admin
Enter Yes to allow the device to request for an IP address and other
network parameters each time its starts up.
Enter No to specify a fixed IP address and the other parameters.
This name identifies the device inside the domain.