Troubleshooting - Sony PMC-222V Operating Instructions Manual

Troubleshooting

Symptom
The power is not on.
There is no audio.
"no disc" lights in the display even
when a CD is in place.
The CD does not play.
The sound drops out.
The sound seems to lose the stereo
effect and becomes monaural.
No picture appears on the TV
screen.
34
Additional Information
Remedy
• Connect the AC power cord to a wall outlet
securely.
• Set the MAIN POWER switch on the side of the
player to ON.
• Make sure that the speakers are connected
correctly.
• Make sure the function you want to use appears
in the display.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• Insert the CD with the label surface up.
• Make sure that the CD compartment is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
• Make sure "CD" appears in the display.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player in a location free from
vibration.
• Press ST/L/R repeatedly until "STEREO"
appears on the TV screen.
• Make sure the TV is turned on.
• Make sure you select the correct video input on
the TV.
• Connect the video connecting cord correctly.
• An audio CD is being played.
• Close the lid of the player.
• Make sure the following mark is on the CD.
• You may not play back some illegally
duplicated CDs even though they have the
above mark printed.
In this case, consult the shops where you
bought the CDs.