Playing A Tape - Sony MHC-WZ5 Operating Instructions Manual

Playing a tape

You can use TYPE I (normal) tape.
1
Load a tape.
2
Press TAPE A/B.
3
Press PLAY MODE/DIRECTION on the
CD player repeatedly to select "g" to
play one side. Select "j" to play both
sides. Select "RELAY" (Relay Play)
play both decks in succession.
4
Press nN.
The tape starts playing.
* Relay play always follow this cyclic
sequence:
Deck A (front side) t Deck A (reverse
side) t Deck B (front side) t Deck B
(reverse side)
GB
16
Playing direction
Other operations
To
Play the reverse
side
Stop play
Pause
Fast-forward or
rewind
Search for the
*
to
beginning of the
next track (AMS)*
Search for the
beginning of the
current track or
previous track
(AMS)*
Remove a tape
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under the
following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the system is placed near a television.
Tip
If you select "
automatically after repeating the sequence five times.
Do this
Press nN again during play.
Press x.
Press X. Press again to resume
play.
Press m or M in stop mode.
Press > during play.
Each time you press the button,
the search direction, + (forward),
and number of tracks being
skipped (1 to 9) appear.
Press . during play.
Each time you press the button,
the search direction, – (back), and
number of tracks being skipped
(1 to 9) appear.
Press A Z or Z B on the tape
deck.
j
" or "RELAY", the deck stops