Sony MHC-VX55 Operating Instructions Manual page 11

To Do this
Stop play Press x.
Pause Press X*
resume playback.
Select a track or Press NEXT or > to go
scene *2 forward, PREV or . to go
back. When you play VIDEO
CDs with PBC functions
(Ver 2.0), see page 21.
Find a point in a There are two types of
track or scene searching:
(Lock Search 1 Turn SHUTTLE until it
function) clicks during playback and
hold. According to the length
of turning the shuttle, speed
changes as follows (press and
hold down m/M on the
remote):
1 (slow) t 2 (normal) t
3 (high)
Release SHUTTLE at the
desired speed and the search
goes on at the speed.
Press nN to stop searching
and start playback at the
desired point.
2 Turn SHUTTLE until it
clicks during playback. Each
time it is turned, speed
changes as follows (press
m/M on the remote):
1 (slow) t 2 (normal) t
3 (high) t 1 (slow) ...
Press nN to stop searching
and start playback at the
desired point.
Select a VIDEO Press a DISC 1~3 button or
CD in stop mode DISC SKIP EX-CHANGE (or
D.SKIP on the remote).
Play only the Press PLAY MODE repeatedly
VIDEO CD you until "CONTINUE 1 DISC"*
have selected "PBC 1 DISC"*
1 DISC"*
Play all VIDEO Press PLAY MODE repeatedly
CDs until "CONTINUE ALL
DISCS"*
or "SHUFFLE ALL DISCS"*
appears.
Remove the Press Z OPEN/CLOSE.
VIDEO CD
Exchange other Press DISC SKIP EX-
VIDEO CDs CHANGE.
while playing
Adjust the Turn VOLUME (or press VOL
volume +/– on the remote).
1
. Press again to
2 ,
3
or "SHUFFLE
4
appears.
2 3
, "PBC ALL DISCS"*
4
* 1 There may be some disturbance in the video
image.
2
* Only when setting the PBC function to off or when
playing VIDEO CDs without PBC functions
(Ver. 1.1).
* 3 Only for VIDEO CDs with PBC functions (Ver. 2.0)
while the PBC function is set to on.
* 4 SHUFFLE means to playback in random order
(see page 31). This function cannot be used during
menu playback of a VIDEO CD with PBC
functions (Ver. 2.0).
Tips
• You can switch from another source to the VIDEO
CD player and start playing a VIDEO CD just by
pressing one of the DISC 1~3 buttons (Automatic
Source Selection).
• If there is no VIDEO CD in the player, "CD NO
DISC" appears in the display.
• When a disc tray holding a VIDEO CD is selected
(or the VIDEO CD in the disc tray is playing) the
disc pointer indicator lights. When a disc tray
holding a VIDEO CD is not selected, the disc
presence indicator lights, but the disc pointer
indicator does not light. When all disc trays are
empty, both the disc presence indicator and disc
pointer indicator light.
Note
When a tray has not been read by the unit, the disc
presence indicator may light even though there is no
disc on the tray.
11