Playing Cds Without Interruption - Sony MHC-V818 Operating Instructions Manual

To cancel Program Play
Press PLAY MODE repeatedly until
"PROGRAM" or "SHUFFLE" disappears
from the display.
To Press
Check the CHECK on the remote
program repeatedly. After the last
track, "CHECK END"
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
program
2 Select the track by
3 Press ENTER/NEXT.
Clear the entire p once in stop mode or
program twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD
(P to play the same program again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20.
– the total playing time has exceeded 100 minutes.
DISC 1~3 button.
turning the jog dial.
Playing CDs without
interruption
–– CD Non-Stop Play
You can play CDs without pausing between
tracks.
You cannot use this function with VIDEO
CDs.
1 2
(Power)
1
Press FUNCTION repeatedly until
"CD" appears in the display, then
place a CD.
2
Press CD NON-STOP to light the
indicator.
"NON-STOP PLAY" appears in the
display.
3
Press CD (P.
To cancel Non-Stop Play
Press CD NON-STOP so that the indicator
goes out and "NON-STOP OFF" appears in
the display.
3
39