Dj Effects; Looping Part Of A Cd; Flashing Part Of A Cd - Sony MHC-V818 Operating Instructions Manual

DJ Effects

Looping part of a CD

— CD Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
You cannot use this function with VIDEO
CDs.
(Power)
Jog dial
CD LOOP
/
Press and hold CD LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Turn the jog dial while holding CD LOOP (or
press SELECT 4 or $ while holding CD
LOOP on the remote) to select different loop
lengths (LOOP 1~20).

Flashing part of a CD

— CD Flash
With the flash function, you can "flash" the
CD sound during playback. This lets you
create original recordings.
You cannot use this function with VIDEO
CDs.
(Power)
Jog dial
CD FLASH
/
Press and hold CD FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
To adjust the flash length
Turn the jog dial while holding CD FLASH
(or press SELECT 4 or $ while holding CD
FLASH on the remote) to select different flash
lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both CD LOOP and CD
FLASH at the same time.
Notes
• The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
• To record the flash effect, use the analog (MD
OUT) connections or this unit's tape deck.
43